Search results

Did you call Autec?

How much clearance above the tallest vehicle you can wash are the bottom of your stand alone blowers? If you have turbo nozzles how high above the max roof height are those set on your machine?

It has two, one coming in on the side of it which would be connected to the output high pressure side of your pump head and one coming out the bottom returning to the inlet/suction side of the pump.

If you have dial or digital calipers you can measure the thickness and carefully put it over a funnel to measure the OD. I have done this many times. Here is a chart of US sizes: https://www.allorings.com/O-Ring-AS568-Standard-Size-Chart

We do not use unloaders but use regulators. The original regulators were Para Plate BR5-2 which lasted a long time. They sell a rebuild kit for cheap but we found that the chrome plating wears off the brass body on the inside and wears out the o-rings quickly after that. Based on a suggestion...

Although I mostly agree with you I think you might be surprised what is out there. The next town over of 43,000 currently has four EEs, one opened two months ago and one opened a week ago. There is one under construction plus an older conveyor site currently being remodeled but may open as an...

Why have a credit card reader on the changer? To save money on readers in the bays?

I have noticed that around here too but not sure why.

Good point and maybe our credit union realizes that and wants to save us members the cost of the tap cards. I'm betting that most people that tap load the cards on their phone instead of tapping the physical card.

I think they are more durable than PVC because they are solid vs corrugated but not nearly as visually appealing. (IMHO)

Maybe things have changed but we were told to go with WashWorld if you were a hands-on operator because they will support you directly. PDQ supports distributors more than operators so if you are more hands off then possibly that is a better choice assuming you have a good local distributor.

Delcan I believe is just PVC panels and not FRP.

I carry several cards for personal and two businesses from the largest credit union in Ohio which also happens to be headquartered nearby. (WPCU) All of them have magnetic strip and chip only. Surely someday they will have tap but they won't tell me when.

https://www.kleen-ritecorp.com/t-2024%20ICA.aspx?trk_msg=QUDM66UJCEV4P6GL7J24NC347G&trk_contact=MNV0COA08151MUT9ML10C04IP0&trk_sid=M86TURANE1HPVGB89OAQ99JLBG&trk_link=Q9BJFGNUKQLKV49LPF9CPVJ01C&utm_source=listrak&utm_medium=email&utm_term=ICA+Free+Shipping&utm_campaign=2024+ICA+Specials

Are these the Chinese machines with their own controls?

Wouldn't the downstream membranes get really high TDS water, especially the last in a series of four? Is the recycle the amount of water going back to the pump inlet? I don't think our system does that because it just has reject and product water flow meters.

https://www.dupont.com/content/dam/dupont/amer/us/en/water-solutions/public/documents/en/RO-FilmTec-TW30-PRO-4040-and-TW30-PRO-2540-PDS-45-D03971-en.pdf Two are plumbed in series and one in parallel to those. Is that not correct?

Yes.

Is this different than the ones they had before? If so did they correct the overheating issues? They don't have the air conditioner that their standard pay stations have.

250 psi max and 16 GPM on ours.