Recent content by Sselby

Production pump is Ginsan Part #17002T. It has a Franklin Electric Motor, but they told me it was a Berkeley pump. Its single phase.

Thank you for that clarification Dan, I should have been more specific on the pump.

Wow, I had no idea. So sorry to hear that.

@MEP001 any thoughts on this?

Hello Everyone, I'm currently trying to revive a 20 year-old RO unit that the previous owner did not take care of. It's the Ginsan Water Lovers RO, 4400 GPD. I believe the production pump is good, but both delivery pumps (for self-serve and automatic) are toast. The motors are good, but the...

I do not Randy.

With the Ginsan system this is not an issue, when TF is selected a NO solenoid on the TF unit is energized turning off the weep. Those solenoids are fed by a main weep solenoid on the pump stand. Talked with Dan @ Ginsan about it today.

I’m right at the TN border

Y Yes, sorry for not clarifying. Triple foam is run through a splatter gun. Thanks for the response.

Hello Everyone, This is my first winter as a car wash owner. I’m located in Alabama and do have my weepmizer installed. I have triple foam and foam brush, and I’m not sure if I need to weep both or run antifreeze soap. Any insight would be appreciated!

Hello, I’m averaging 12-15 seconds, no matter which bay I’m testing, to get low pressure functions to the bay. I have the Ginsan Ultimate System that utilizes three FloJets for three LP functions. I have Tire Cleaner and Presoak set up to run thrI know there are a lot of variables, but what are...

Thanks Earl, are you referring to the 5 GPM or 7GPM G57?

Thank you for the response. What are you guys doing to ensure dry air? I have air regulator/filter combos straight off the compressor and then again right before my low pressure system.

Hello All, I took over a 3 bay self serve about 8 months ago. I have the Ginsan Ultimate System that comes stock with 7 GPM FloJets. From what I’ve read, the Viton Diaphragm is the way to go on Presoak and tire cleaner and Santoprene can be used on FB and TF. My question is, do I need 7 GPM...