toddmullens's latest activity
-
Ttoddmullens replied to the thread Petit 360 worth the extra money????.They are specially modified nozzles by Petit. They drill out the slot on the nozzle somehow.
-
Ttoddmullens replied to the thread Water Wizard 2.0 does Not contour.I will have to check on the other machine to make sure that the boom comes down in dry wash mode, but I did a dry wash and the boom did...
-
Ttoddmullens replied to the thread Water Wizard Cat 3535 Pump/Unloader Issue.https://www.zoro.com/dayton-encapsulated-timer-relay-1a-solid-state-6a857/i/G2034846/
-
Ttoddmullens replied to the thread Water Wizard 2.0 does Not contour.The eyes I replaced were the hard wire type without the quick disconnect. I have learned not to use the quick connect eyes. They always...
-
Ttoddmullens replied to the thread Water Wizard 2.0 does Not contour.Having this exact issue now and have determined that the machine thinks the boom safety eyes are blocked at some point during the first...
-
Ttoddmullens replied to the thread Water Wizard Cat 3535 Pump/Unloader Issue.Installed off delays on top spray solenoid, rocker panel solenoid, and undercarriage solenoid. Stopped the issue, but they could easily...
-
Ttoddmullens replied to the thread NOR-G41053 Nord Oscillating Motors for Water Wizard 2.0.Any update on this?
-
Ttoddmullens replied to the thread PreSoak streaking.We did a max of 36 cars per hour in 2 bays running a 6 pass top wash and 4 pass middle and bottom wash. This is in short bays with...
-
Ttoddmullens replied to the thread Water Wizard 2.0 Presoak Issue.Any idea where to get these SMC solenoids without having to go through Coleman? They seem to be an uncommon solenoid that has a high...
-
Ttoddmullens replied to the thread PreSoak streaking.set the pressure too high and you will have issues with additional solenoids opening after the initial solenoid opens. For instance the...
