washnvac
Well-known member
Does anyone have the programming instructions/parameters for the plc that runs a Pur-Clean Reclaim? The plc is a Siemens LOGO! 230RC.
Pur-Clean programming
- Thread starter washnvac
- Start date
br549ms
Member
Most of these type of systems lock the program so you cannot view or edit certain aspects. That is probably why they used Siemens. Good luck on getting a copy. Also you will need Siemens software to connect to the PLC ��. About all you can do if you have the software, you can pull the raw program out and copy it (VAT)
