R Ric Cantree Member Joined Aug 31, 2007 Messages 967 Reaction score 5 Points 18 Location West Michigan Jul 15, 2009 #1 How are you applying your super sealant (rain x, double bond etc.)? Low pressure or high pressure? In what order are the cycles on the wash that you apply it on? Thanks.
How are you applying your super sealant (rain x, double bond etc.)? Low pressure or high pressure? In what order are the cycles on the wash that you apply it on? Thanks.
B briteauto Member Joined Sep 14, 2007 Messages 326 Reaction score 0 Points 16 Jul 18, 2009 #2 On my soft touch machine, right after the final rinse, but before the sf rinse. Low pressure.
J Jeff_L Well-known member Joined Dec 27, 2007 Messages 1,246 Reaction score 31 Points 48 Location Missouri Jul 6, 2015 #3 Right before SF cycle and with low pressure in both my soft touch and touchless.
robert roman Bob Roman Joined Sep 11, 2007 Messages 2,200 Reaction score 1 Points 36 Location Clearwater, Florida Jul 6, 2015 #4 Rain-X total body, double bond, ICE and similar sealant are close to super-hydrophobic range. This means there is no need to pre-rinse or use a drying agent if this type of product is applied. So, emulate tunnel process. Super sealant is applied after washing and followed by spot free rinse.
Rain-X total body, double bond, ICE and similar sealant are close to super-hydrophobic range. This means there is no need to pre-rinse or use a drying agent if this type of product is applied. So, emulate tunnel process. Super sealant is applied after washing and followed by spot free rinse.