WW 2.0 error 100 and can eyes

[stampedecarwash]

Hello, when you get error 100(see pic) is that due to the eyes in the can loose/bad or also the other eyes (see pic). Thanks

 

[Greg Pack]

The measurement eye is the one inside the gantry that looks diagonally across. It is about chest height on the drivers side, and knee height on the passenger side. As you replace the eyes buy the ones with the long cable. The connectors are what causes most of the problems with these.

 

[stampedecarwash]

Thanks, wondering whats the eyes inside the can do? Noticed the machine says “backup” although the customer car not even on the treadle yet.

 

[Greg Pack]

The back up light is on because the measurement eye is off /blocked and the machine thinks the car has overshot the treadle.

 

[stampedecarwash]

Thanks Greg, to sum it up, this both issues are related to the measurement eyes which are 7.10 and 12.12 on this pics.

 

[stampedecarwash]

UPDATE; changed the measurement eyes and no more error 100, but then machine asking for backup with no error and going all the way to the other side of the track. Changed the eyes in the cans as well , and its fixed. I supposed to get error 101 when cans eyes bad but they were good in the start of the machine, but as soon as machine moved it got disconnected. Also when error 100 boom doesn't come down on both frond and rear, but in this case boom was coming down in the front.