Recent content by lag

  1. lag

    Advice: Building a wash

    Have you considered a CONFORM building? Basically, it is a concrete building poured into forms that become the walls. Cost effective and quick to put up. We used on the last wash I was involved with building. Full disclosure… I recently took a job with another wash supplier, and we represent...
  2. lag

    Spot Free System

    2 membranes to produce 8K per day? if they are the standard size (40x4) you would be at max of 3600 gal per day, or 2.25 per minute.
  3. lag

    Lexair Rebuild - LW 4000

    Sorry missed your post.. back up ring(white) goes away from the pressure. Black oring towards pressure. The puck has a small hole in it, the hole towards the air. I like to see the air pressure for the valves at 10 psi per 100 psi of pump pressure. so 1000 psi pump equals 90-100 psi of air ball...
  4. lag

    Fragrance or shampoo combo vac

    We have a couple shampoo vac combos. One is A Jim Coleman unit, other is a fragamatic. Both brand new. PM if interested
  5. lag

    Lexair Rebuild - LW 4000

    Out. Away from pump station
  6. lag

    Question on Razor vs High Velocity

    I timed the HV against the Razor. The same exact vehicle, both programmed identically. The Razor washed 16% faster. You should be able to wash even faster with the Razors by utilizing some of the flex features etc. I did a small sample however..4 washes only
  7. lag

    Ver-Tech labs products?

    Ver Tech has good chemicals. Lots of operators around here use them, I believe. Are you switching because of costs or poor performance?
  8. lag

    Laserwash 4000 waiting for eyes to clear

    Front eyes not rear eyes. :o
  9. lag

    Laserwash 4000 waiting for eyes to clear

    Have you tried replacing sheer bolt? Over time they can bend slightly causing lower arm to interfere with the rear t-bar eyes
  10. lag

    Wall Paint - Recomendations

    I sent you a PM
  11. lag

    Weep water: hard or soft?

    Always used hard water, just wasting money otherwise
  12. lag

    Pour new concrete over old ?

    Will it effect the vehicle height you can accept in the two auto bays?
  13. lag

    Spot Free Help

    I was wondering about middle one myself. Yes PSI will need to get corrected, even so id expect your TDS to be lower. may need regulator or rebuild?? is it a 3 phase pump? may need to just switch a couple legs around to get the pump to turn in right direction,
  14. lag

    Waters spots after SFR.

    Yes same here always when high dew points dryers just couldn't dry out. just get high pressure washer out and clean from time to time.one more job to add to never ending to do lists.
Top